ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 436)

418 Eos Titanium, Eos, and Gio Operations Manual
Live Mode
Live mode is used for modifying levels and recording/updating cues. This mode is intended to allow
you to make basic adjustments to show data. Buttons and softkeys function as they do within Eos.
The command line is displayed in the LCD to verify the commands you enter. It also displays details
for the currently selected channel or the current cue (if no channels are selected)
Softkeys
The following softkeys are available on page one of live mode:
• Group
• Rem Dim
• Sneak
• Full
• Out
• Macro
The following softkeys are available on page two of live mode:
• Rec
• Update
• Time
• Cue Only/Track (shown as “Qoly/Tk”)
• Address
{Macro} allows you to execute a macro.
• {Macro} [3] [Enter]
In live mode, the left thumbwheel controls the level of the selected channels. The right thumbwheel
acts as next/last buttons, defaulting to next/last cue selection for the currently selected cue list.