ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 419)

D
Using the RPU and RVI 401
Front Panel
Step 1: Press the soft power switch to activate the RPU (check rear panel to ensure power
is connected and hard power switch is on).
Step 2: Backlit indicators identify the operating status (master, backup, client, and so on) of
the unit.
Step 3: USB port is provided for easy show loading to or from a USB storage device.
Step 4: 20 buttons are configurable from the Eos Configuration Utility (ECU). They are set to
a default configuration. The label strips for these buttons are removable and
reversible. Any changes to the button configuration can be written on the opposite
side in pencil.
Live Tab Escape Select M901 M902 M903 M904 Stop/Back
Blind Scroll Lock M905 M906 M907 M908 Go
Master
Primary
Expand
Client
Tracking
Backup
Soft Power
Switch
20 user-
configurable
buttons
(default shown)
USB Port
Backlit
Indicators