ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 420)

402 Eos Titanium, Eos, and Gio Operations Manual
Remote Processor Unit (RPU)
Hardware Setup
Rear Panel
Step 1: Attach the appropriate IEC power cord to the power connector.
Step 2: Connect any monitors to the proper ports on the back of the RPU
Step 3: Connect the USB mouse and keyboard to the USB connectors.
Step 4: Attach a network ethernet cable to the ethernet port.
Step 5: Once all accessories have been connected, you may activate the hard power switch
on the rear panel.
N o t e : Older versions of the RPU hardware will vary from the images shown here.
N o t e : The Eos RPU can support up to two monitors, either two DVI monitors or one VGA
and one DVI. The minimum screen resolution must be at least 1280x1024 by 32bit
color.
3U Processor Unit 3U Processor Unit
AC Input AC Input
100-240VAC 100-240VAC
50/60Hz 2A 50/60Hz 2A
Electronic Theatre Controls, Inc. Electronic Theatre Controls, Inc. Middleton, WI Made in USA Middleton, WI Made in USA C US US
www.etcconnect.comw w w .e tc co n n ec t. co m
Hard Power
Switch
IEC Power
Connector
DVI-D Video
Ports
6 USB
ports
Ethernet
VGA Video
Port
Audio Ports
(Not Currently Enabled)