ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 62)

44 Eos Titanium, Eos, and Gio Operations Manual
Organizing the Direct Selects
You have considerable flexibility in how you organize the direct selects. They may be arranged to
display one of several different types of data.
To choose which information to view:
Step 1: Press the {Select} button for any block of direct selects. You will be offered the
following choices to view: Channels, Groups, Intensity Palettes, Focus Palettes,
Color Palettes, Beam Palettes, Presets, Macros, Snapshots, and Effects.
Step 2: Press the button for the data you wish to view and the associated direct selects will
populate with any recorded information of that type. If there is no recorded information
of that type the block of buttons will remain empty but will populate with data of that
type as associated record targets are stored.
Step 3: You may also press {Select} again, without choosing any option, to return to the
previous state.
You can increase/decrease the size of any set of direct selects by pressing the {20/50} button,
which will change the display between one set of 50 buttons and two sets of 20 buttons. Or you may
press the {100} button to expand LCD1 on Eos and LCDA on Eos Ti and Gio to a full set of 100
buttons. Press {100} again to switch back to the previous view.
You may also press the {Expand} button (located beneath the {Select} button) to expand a set of
direct selects to full screen. Press {Expand} again to return the set to its previous size and
mapping. Century and Millennium buttons will display when direct selects are in expand mode.
When the direct selects are opened on a tab, two sets of direct selects will be displayed.
Adjusting the Direct Select View
When using button modules on Eos, you may need to adjust the horizontal or vertical alignment of
the direct select arrays, depending on your viewing angle. You can adjust these settings in {Desk
Settings} in Setup.
To adjust the horizontal or vertical alignment of direct selects:
Step 1: Press [Displays]. The bottom of the CIA repaints to show the display options.
Step 2: Press {Setup}. The CIA repaints to show the setup touchbuttons.
Step 3: Press {Desk} at the bottom of the CIA.
Step 4: Press {Displays} on the left side of the CIA. Four virtual sliders appear; two for the
Primary (central) LCD and two for the Slider (left) LCD.
Step 5: Adjust the virtual sliders using the gold arrows at top and bottom or by touching the
slider bar and dragging it to the desired level. As it moves, you will see the direct
selects adjust accordingly.
You can return the sliders to their default position at any time by touching the {Reset} touchbutton,
located just beneath the adjustment sliders.