ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 64)

46 Eos Titanium, Eos, and Gio Operations Manual
Selecting Channels with Direct Selects
Channel direct selects are highlighted when selected. Channel selection from the direct selects is
an additive process, if channels 1-5 are selected, pressing {Channel 6} adds channel 6 to the
selection, leaving channels 1-5 also selected. Pressing {Channel 6} again will deselect the
channel.
If you have labeled channels in patch, those labels will be displayed above the channel number
when viewing channels in the direct selects.
It is possible to double hit a channel button. This selects that channel and deselects any previously
selected channels.
When using the button module, pressing and holding a channel button while pressing another
channel button selects those two channels and all channels in between. This behavior is not
supported when channel selects are used on the touch screens without the module.
• {Channel 1} - adds channel 1 to currently selected channels, if not currently selected.
• {Channel 1} {Channel 10} - adds channels 1 and 10 to currently selected channels.
• {Channel 1} & {Channel 10} - adds channels 1 thru 10 to currently selected channels (if
button modules are used (Eos Only)).
• {Channel 1} {Channel 1} - selects channel 1, deselects all other channels.
• {Page  } - pages direct selects down by one page.
• {Page  } - pages direct selects up by one page.