ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 310)

292 Eos Titanium, Eos, and Gio Operations Manual
Loading Submasters
Submasters can be loaded with cues, presets, or palettes.You can convert an empty fader to a
submaster without configuring it in setup. Any fader can be configured and loaded with a submaster
if:
• the fader is not configured
-or-
• the fader is configured as a playback but has no cue list loaded to it
-or-
• the fader is configured as a submaster, but that submaster is empty.
Regardless of the fader configuration in setup, if the above conditions are met, the fader can be
loaded with the submaster specified on the command line.
If a submaster with data (or a playback fader) already occupies the fader, that fader must be
unloaded before another submaster can be loaded.
• [Sub] [5] {Load} - loads submaster 5 to the fader associated with the load button.
• [Cue] [5] [Sub] [4] [Enter] - loads the contents of cue 5 to submaster 4 (a {CopyTo}
command will appear within the syntax on the command line).
• [Cue] [5] {Load} - loads cue 5 to the submaster associated with the chosen load button.
• [-] [5] [Cue] [5] [Sub] [6] [Enter] - loads the contents of cue 5, minus channel 5, to submaster
6.
• [Cue] [1] [Thru] [5] [Sub] [1] [Thru] [4] [+] [7] - sequentially loads cues 1 thru 5 to subs 1,
2, 3, 4 and 7.
• [Cue] [1] [Thru] [5] [Sub] [1] [Thru] [Enter] - sequentially loads cues 1 thru 5 to subs 1 thru
5 (a {CopyTo} command will appear within the syntax on the command line).
Updating a Submaster
It is possible to make changes to a submaster in live mode. [Update] is used to store changes to a
submaster.
• [Update] [Sub] [5] [Enter] - updates sub 5 to include changes in live output only for channels
already in submaster 5. You can also press the bump button for submaster 5 to select it.
• [Channel list] [Update] [Sub] [5] [Enter] - adds only the specified channels to submaster 5.
Labels can be changed without restoring the contents as well:
• [Sub] [6] [Label] [xxxx] [Enter]
• [Sub] [6] [Label] [Label [Enter] - removes the label.