Selecting channels, Select channels from the keypad, Using groups as a channel collector – ETC Eos Titanium, Eos, and Gio v2.0.0 User Manual
Page 154
136
Eos Titanium, Eos, and Gio Operations Manual
Selecting Channels
Eos provides many different interactive ways to select channels, including the control keypad, direct
selects and touch screen access.
Channels are deselected when any action is taken on the keypad that is unrelated to manual
control, such as recording groups and cues, or updating a record target, etc. You can also press
[Clear] after a terminated command line to clear the channel selection.
Select Channels From the Keypad
The keypad defaults to selecting channels. Channels may be selected on the control keypad using
the [+] and/or [-] and [Thru] keys for consecutive or non-consecutive channel selection.
The following examples illustrate various methods of selecting channels from the control keypad:
• [5] [Enter] - selects channel 5.
• [5] [+] [7] [Enter] - selects non-consecutive channels 5 and 7.
• [5] [Thru] [9] [Enter]- selects channels 5 through 9.
• [2] [Thru] [8] [-] [5] [Enter] - selects a range of channels 2 through 8, except channel 5.
• [-] [6] [Enter] - removes channel 6 from the current selection list.
• [+] [1] [Enter] - adds channel 1 to the current list of channels.
Using Groups as a Channel Collector
[Group] can be used as a quick way to collect channels from submasters, cues, palettes, or
presets.
See “Using Groups” on page 161.
The following actions are possible:
• [Group] [Cue] [1] - selects all the channels in cue 1.
• [Group] [Sub] [3] - selects all the channels in submaster 3.
• [Group] [Int Palette] [5] - selects all the channels in intensity palette 5.
N o t e :
You may use [+] and/or [-] multiple times to add or remove multiple channels from
the selection. [Thru] lists may be entered in ascending or descending order.
N o t e :
The [Thru] command uses the current flexichannel state. Channels not included
in the flexichannel mode (except selected channels mode) are not collected in a
thru range. [Thru] [Thru] can be used to collect all channels in the range, even if
they are not in the current flexi mode.