ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 149)

7
Setup 131
Group Chans By 5
You can turn off/on the grouping of channels in groups of 5 in the live summary view from this field.
The default for this setting is “Enabled.”
DirSel.Dbl Clk
When enabled, double clicking a direct select button will act as [Recall From] [Record Target] to
place the entire contents of that preset, palette, or step-based effect on stage. The default for this
setting is “Disabled”.
100 Channel Display
This setting can be used to display 100 channels at a time in the live summary view. The default for
this setting is “Disabled.”
Cmd Line on PSD
This setting can be used to display an optional command line on the Playback Status Display. The
default for this setting is “Disabled”.
PSD Time Countdown
When enabled, the cue category times will countdown in the PSD as a cue is fading. The default for
this setting is “Disabled”.
User Id
You can Change the User ID for the console by selecting this button and entering a number from the
keypad. For more information on User ID see
About User ID, page 358 .
Display Adjustments
This setting allows you to adjust the Primary Display Offset and the Slider Display Offset. Each
offset has the ability to be adjusted separately horizontally and vertically. A {Reset} button is also
available to return to factory display adjustment defaults. (Not available on Eos Ti or Gio).
{PDF File Settings}
This screen allows you to select the orientation and paper type for PDF files.
{Brightness Settings}
This screen on Eos allows you to adjust the brightness and contrast settings for the fader wing
LCDs and the light level for desk lamps.
This screen on Eos Ti and Gio allows you to adjust the brightness and contrast settings for the fader
wing LCDs, the light level for desk lamps, backlit keyboard, and the LCD brightness.
Master
The master can be used to set an overall limit to the brightness of the other brightness settings.
Eos Ti and Gio
Setup Display