ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 176)

158 Eos Titanium, Eos, and Gio Operations Manual
Select Manual
The [Select Manual] key is used to select all channels that currently have manual data. You may
use [Select Manual] combined with the parameter control keys to capture only certain parameters
of a channel with manual data.
The following examples illustrate the various methods to select channels using [Select Manual]:
• [Select Manual] [Enter] - selects all channels with manual data.
• [Select Manual] [Color Palette] [1] [Enter] - selects all channels with manual levels and sets
them to color palette 1.
• [Color] [Select Manual] [Color Palette] [1] [Enter] - selects only channels with manual color
values and sets them to color palette 1.
• [1] [Thru] [1] [0] [0] [Select Manual] [Enter] - selects channels between 1 and 100 with
manual data.
• [Select Manual] [Record] [Group] [n] Enter] - records channels with manual data to the
target group.
Select Active
The [Select Active] key is used to select all channels that currently have intensity levels above
zero. Pressing [Select Active] once will capture all active levels. Pressing [Select Active] twice
will capture all active manual levels and those from playbacks except for submasters. Select
NonSub Active will post to the command line.
The following examples illustrate the how to select channels using [Select Active]:
• [Select Active] [Enter] - selects all active channels with intensity levels above zero.
• [Select Active] [Record] [Group] [x] [Enter] - records active channels to the target group.
• [Select Active] [Sneak] [Enter] - selects all channels with intensity above zero and restores
manual control to the background state, using default sneak time, if enabled.
• [1] [Thru] [1] [0] [0] [Select Active] [Enter] - selects channels between 1 and 100 with
intensity levels above zero.
On a completed command line, using [At] or [Select Last] after [Select Active] or [Select
Manual] will post the numeric channel list to the command line.
For example, cue 1 is active, and has channels 1 through 5 at full. Using the syntax, [Select Active]
[Enter] [At] will post channels 1 through 5 onto the command line.
Another example, Channels 10 through 20 have a manual level of 75. Using [Select Manual]
[Enter] [Select Last] will put channels 10 through 20 onto the command line.
Select All
Pressing [Shift] & [Select Last] will give the additional softkey option, {Select All}. {Select All} will
select all channels.