ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 151)

7
Setup 133
{Fader Wing Config}
This screen allows you to manually configure the positions of fader wings connected to the Eos.
The console will default to configuring the wings on its own.To manually configure, you must click
on the {Manual Config. Off} softkey.
Clicking on the {Manual Config. Off} button turns manual configuration on and displays the Fader
Wing Configuration screen.
Clicking {Identify} will display numbers on each wing’s display to aid in configuration. The numbers
do not identify the wings as to their actual order. Order is determined from left to right. The left most
wing will contain the first faders.
Click and drag the wings to match your physical layout. Click {Apply} to save the changes. Clicking
{Reset} will restore to the last saved configuration. Clicking {Manual Config. On} will turn off
manual configuration and will require a restart of the application before the console will
automatically configure the wings. For more information on using fader wings, see
Universal Fader
Wings, page 423
{RFR Settings}
This screen is for allowing Net3 RFR, iRFR, and aRFR connections. The default setting is
“Enabled”. For more information see
RFR, page 383 and Radio Focus Remote (RFR), page 411 .