ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 239)

14
Working with a Single Cue List 221
Update [+]
[+] can be used to specify a range of cues for updating. [+] can also be used with [Record] and
[Record Only].
For Example:
To update only cues 5, 10, and 15:
• [Update] <Cue> [5] [+] <Cue> [1][0] [+] <Cue> [1][5] <CueOnly/Track> [Enter]
To update the current cue and cue 7:
• [Update] [+] <Cue>[7] <CueOnly/Track> [Enter]
N o t e : If no cue number is entered before the [+], the current active cue will be used.