ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 441)

F
Universal Fader Wings 423
Appendix F
Universal Fader Wings
Overview
Universal Fader Wings can be used in conjunction with your console to facilitate the use of
submasters, playbacks, and/or Grandmasters. The wings are available in 2 x 10 or 2 x 20
configurations.
Rules of Connection
Rule One for Eos
Your entire system is limited to a total of 300 faders per processor (a processor is an Eos, RPU, or
RVI).
Universal Fader Wings may be connected together and then connected to Eos consoles using a
USB cable. When attaching fader wings with a USB cable, one external power supply must also be
used.
Rule One for Gio/ Eos Ti
Your entire system is limited to a total of 300 faders per processor (Eos, Eos Ti, Gio, Ion, RPU, RVI).
Each fader wing can connect directly to an USB port on Gio, but must be powered separately.
Fader wings can be daisy chained together, but they must be plugged into a USB 1.1 hub and then
connected to an USB port on Gio. There is a limit of three wings per port.
Rule Two
No more than three fader wings may be physically attached to each other.
N o t e : Only one wing (2 x 10 or 2 x 20) may be used with Eos Family offline software
running on a personal computer. The Mac OS is not supported.
N o t e : Eos and Gio will automatically configure the fader wings from left to right. Manual
configuration of the wings can be done from the setup menu.