ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 269)

17
Cue Playback 251
Manual Master Cue Lists
Manual master is an additional condition for cue playback. In this mode, cues are triggered
manually by faders without using the [Go] button. With a cue list on a fader set to manual master,
a cue will fire in manual time when the fader is moved from 0% or from Full. This is all done without
hitting [Go]. Any cues in a manual master list not fired by moving a fader, but triggered via [Go]
instead, will fade according to cue’s timings.
To set a cue list to manual master, use the {Fader} softkey in the Cue List Index. To access the cue
list index, press [Cue] [Cue]. {Fader} will toggle between Proportional Master, Intensity Master,
and Manual Master. The default is Proportional Master.
When manual master has been selected as the fader mode for a cue list, the initials ‘MM’ will
appear above the cue list label field. Initials ‘IM’ will display when set to intensity master mode.
Timing is scaled. So, if color has a 5 count delay, and the duration of the cue is 10, the color
transition will not begin until the faders manually reach 50%.
For more information about the other modes available, see Fader type, page 238 .
N o t e : Follow and hang times will be ignored when firing a cue with a manual master
fader.