ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 435)

E
Radio Focus Remote (RFR) 417
RFR Operation Modes
The Eos RFR defaults to opening in Channel Check mode the first time. The next time it is
connected, the RFR will return to the last mode it was in. There are other modes available in the
RFR, however. To switch modes, hold down the [Mode/More SK] button and then select the
desired mode from those available by pressing the appropriate softkey. Mode options are: Channel
Check, Park, Live, Playback, and Patch.
Channel Check Mode
This mode allows you to perform channel and address checks. The default is Channel. Check will
automatically be placed at the end of every command while in this mode.
Softkeys
The following softkeys are available for Channel Check mode:
• Address
• Last
• Full
• Next
The right thumbwheel acts as next/last buttons. The left thumbwheel doesn’t have a function in this
mode.
Park Mode
This mode is used for parking channels and also for “channel check” and “address check”
functions.
Softkeys
The following softkeys are available in park mode:
• Address
• Channel
• Last
• Full
• Out
• Next
{Address} and {Channel} are used to select addresses or channels for parking.
• <Channel> [7] [@] [5] [Enter] - Parks channel 7 at 50%.
• {Address} [8] {Full} - Parks address 8 at full.
{Full} and {Out} are used to set those levels for channels or addresses.
• [9] [@] [Enter] - unparks channel 8.