ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 140)

122 Eos Titanium, Eos, and Gio Operations Manual
Fader Configuration
This screen allows you to specify what your faders are assigned as: playbacks, submasters, or
grandmasters.
To change the configuration of any fader, use the {Page} buttons to access the fader page you wish
to alter. For the desired fader, press the appropriate button (playback, submaster, or grandmaster)
for the configuration you desire. Then press the {Mapped to} button and enter the number you
want to map the fader to (see
Mapped to... below). When you are done making changes, press
{Close}.
To leave this screen at any time without saving changes, you must press {Close}.
Mapped to...
This button is used to specify the action target of any fader. It allows you to define the fader target
that a slider is assigned to. Mapping is specific to the type of fader configuration (playback,
submaster, or grandmaster).
Submaster - A maximum of 300 submasters can be recorded. {Mapped to} defines the
submaster number that will be controlled by the specified slider. If a submaster slider is
mapped to 10, when submaster 10 is recorded it will appear on that slider.
Grandmaster - 1 grandmaster may be assigned, but multiple instances of that GM may be
mapped. A grandmaster inhibits all live intensity values. If the GM is set at 50%, all live
intensities will be at 50% of their actual values. Inhibited levels from the grandmaster do not
impact data storage.
Playback - A maximum of 200 playbacks can be assigned. {Mapped to} can allow you to
have the same playback appear on multiple pages as it represents a playback number, not
a specific fader or cue list number. To change the mapped location of any playback, press
the {Mapped to} button for that slider and enter the number you wish to assign to it.
Unmapped - Selecting unmapped for any fader leaves that fader open and unoccupied.
N o t e : Unless you need a grandmaster or want to load multiple instances of a cue and
have different playback numbers for them, it is generally not necessary to use the
fader configuration screen. Assigning cue lists and submasters can all be done
from live.
Defined as Submaster Defined as Grandmaster Defined as Playback