ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 164)

146 Eos Titanium, Eos, and Gio Operations Manual
Flip
The {Flip} button, as displayed in the Pan/Tilt section of the encoder LCD, is used to flip the unit into
its exact same position, but from the other direction. Depending on the current values of pan and tilt,
there may be multiple flips.
Trackball On/Off
The {Trackball On/Off}, as displayed in the Pan/Tilt section of the encoder LCD, is used to give
pan and tilt functionality to a mouse or trackball device.When this function is turned on, above the
CIA will be a message saying “Cursor as Pan/Tilt”.
Shutter Control
Pressing the [Shutter] button displays shutter controls, if there are any fixtures with framing
devices patched. The encoders control either the “Frame in” parameter or the “Frame Angle” for all
available shutters. Use paging to access the other shutters.
• Frame in- determines how far in and out of the beam the blade travels.
• Angle - determines the angle that the blade sits in the beam.
Different fixtures control shutters in different ways. Eos provides you standardized use of all
shutters through patch.
Press the [Shutter] button again to access the additional shutter controls, available to the specific
channel.
Custom Control
Pressing the [Custom] button displays intensity controls.
Intensity parameters may include:
• Intens - controls intensity for a single intensity channel or master intensity for a multiple
intensity channel.
• Intens 1-4 - controls the various intensities of a multiple intensity channel.
• Intensity MSpeed
Press the [Custom] button again to access the additional intensity controls, available to the specific
channel.