Scaled parked values in live, Parked addresses in live – ETC Eos Titanium, Eos, and Gio v2.0.0 User Manual
Page 303
21
Using Park
285
• [2] [At] [Park] [Enter] - if channel 2 is unparked, this command parks intensity at the current
value. If the intensity for channel 2 is parked, this command unparks intensity.
• [2] [Color Palette] [8] [Park] [Enter] - parks the color for channel 2 in color palette 8.
• [2] [Color] [Park] [Enter] - parks channel 2 color at its current value.
• [Group] [Cue] [6] [Park] [Enter] - parks all the channels stored in cue 6 at their levels
provided in the cue.
• [Park] [Enter] - clears all parked channels and scaled park instructions (see
). A confirm is required. When a channel is unparked, it reverts to the
level the console is currently providing, or its default value if there is no current instruction.A
confirmation will be required.
Scaled Parked Values in Live
A scaled parked value allows the intensity output (only) to be modified proportionally in live. Scaled
park values are ignored when storing a record target. The setting on the display indicates what
should be stored, not the actual scaled value. An example of how to set a scaled parked value in
live includes:
• [3] [At] [/] [1] [2] [5] [Park] [Enter] - sets a scaled value of 125% on channel 3 intensity. In
other words, whenever channel 3 is active, it will be active 25% higher than its current setting.
• [3] [At] [/] [8] [5] [Park] [Enter] - sets a scaled value for channel 3. Whenever channel 3 is
active, it will playback 15% lower than its current setting.
Remove the scaled parked value:
• [3] [At] [/] [Park] [Enter] - unparks a scaled intensity for channel 3.
• [Park] [Enter] - unparks all parked channels.
A channel can have both a scaled parked value and a parked intensity value. Keep in mind that the
parked intensity has priority over (and overrides) scaled park values. A channel can have a parked
value or a scaled park value, but not both.
Parked Addresses in Live
DMX addresses can be parked in Live. Below are some examples of parking an address in live:
• [Address/Patch] [5] [At] [5] [0] [Park] [Enter] - parks output 5 at 50% intensity.
• [Address/Patch] [5] [Park] [Enter] - unparks output 5.
• [Address/Patch] [Park] [Enter] - unparks all parked outputs.