ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 396)

378 Eos Titanium, Eos, and Gio Operations Manual
ETC Touchscreen Settings (Eos Only)
For basic calibration of your ETC touchscreen, see Calibrate ETC Touchscreens (Eos Only), page
368 . For advanced calibration and settings, use the {ETC Touchscreen Settings} button.
Pressing {ETC Touchscreen Settings} will open the properties window for the monitor. This
window has 7 tabs: general, setting, tools, display, edge compensation, hardware, and about.
Upgrade Console
{Upgrade Console...} is used for upgrading the desk's outputs.
Upgrade I/O Firmware
{Upgrade I/O Firmware} is used to upgrade the firmware in the desk’s I/O card. When you first
open the I/O Downloader, it will look for the connected console. This may take a second or two.
Once the console is found, the downloader will search for the needed files. If it finds the file, it will
list it and you can click {Download}. If it doesn't find the file, you can use {Browse} to look for the
needed file and selected it. Once finished, click {Exit}.
Network Drives
{Network Drives...} allows you to select an alternative show file storage location on another desk
or computer. After setting this location, it will appear as an option within the save and open dialogs
in Eos.
In the {Network Drives...} dialog box, there is a {Add} button for mapping a network drive. In the
In the Add Network Drive dialog box, select the drive letter that is appropriate, the network path, and
the path type. The network path can use either the IP Address or the Device Name. (Example:
\\10.101.90.101\ShowArchive or \\YourDeviceName\ShowArchive) The network path type can be
Eos, Gio, Ion, Element, Eos Ti, or Other. If Other is selected, you will have additional fields to fill out
for Username and Password.