Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 122)

122 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 4 Collecting and Reviewing Data
The Data Collection screen appears.
Depending on what you have configured in Emonitor, each of these
parameters may offer more selections when you press the Right arrow.
For example, if you select the Location parameter and press the Right
arrow you will be taken to the Select Location Screen.
Move through a List
There are several methods for moving through a list:
• If you set Auto Store to On in the Instrument Configuration screen, the
data collector automatically goes to the next measurement in the list.
• If you set Auto Store to Off, the data collector goes to the next
measurement when you press Enter to accept the measurement.
You can also move between items on a route in the Data Collection window
without collecting data. You can skip a measurement point or an entire machine
if necessary and continue with the list. You can exit Data Collection mode at any
time by exiting the Data Collection screen.