Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 20)

20 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 1 The Enpac 2500 Data Collector
In addition, Emonitor can optimize your data collection by combining
measurement definitions at a location. For example, Emonitor could combine
two magnitude and one spectrum measurement definitions so that the list
appears to contain only a single measurement. This allows you to collect all three
measurements at one time, minimizing the time you spend collecting data.
The Enpac 2500 is a two-channel, real-time Fast Fourier Transformer (FFT)
analyzer and data collector for predictive maintenance and machinery vibration
diagnostics. It is capable of measuring, processing, displaying and storing a wide
range of analysis functions. It can operate as a stand-alone instrument or you can
download your measurements to your software application for program analysis.
Safety Information Be aware of these safety precautions.
Optical Ports
Laser Radiation Ports
IMPORTANT Avoid Water
The Enpac 2500 data collector is splash and dust resistant. However, avoid
direct contact with water, wet surfaces, or condensing humidity. Keep this
instrument away from wet locations, for example, laundry, wet basements,
swimming pools.
If the data collector subject to these conditions, adverse operation may result.
Before you use it, let the instrument dry thoroughly before operating.
ATTENTION: To avoid damage or injury, place the Enpac 2500 data collector on
a solid stable surface when not in use and do not place any heavy objects on it.
Use only the accessories recommended by Rockwell Automation. Keep liquids
and foreign objects away from the instrument, and never operate it if any liquid
or foreign object has entered it.
ATTENTION: When the laser on the data collector is active, viewing the laser
beam can expose your eyes beyond the maximum permissible exposure
recommendations and cause harm.
ATTENTION: Class 1 laser product. Laser radiation is present when the system is
open and interlocks bypassed. Only trained and qualified personnel should be
allowed to install, replace, or service the instrument.