Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 248)

248 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 9 Time Recorder Application
Reviewing Time Recorder
Measurements You can review previously recorded measurements with the Enpac 2500. Note
that only a small portion from the end of the recorded data can be reviewed with
the data collector. To review the entire data file, you must transfer the file to your
computer.
See Copying Time Recorder Files to the Host Computer on page 251 .
To review recorded measurements with your Enpac 2500, follow these steps.
1. Select Recorder on the Main Menu and press the READ/OK key.
The Recorder screen appears.
2. Select Review Data and press the READ/OK key.
The Recorder - Review Data screen appears.
3. Highlight the filename that you want review and press F4 (Open).