Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 252)

252 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 9 Time Recorder Application
6. The New Partnership window closes and the ActiveSync window shows
you are connected as ‘Guest.‘
7. Using Windows Explorer, copy the time recording files (.csv and .wav)
located in the Mobile Device/Internal Disk/Analyser/Recorder directory
on the Enpac 2500 to the host computer.
Deleting a Time Recorder Measurement and Setup
1. Select Recorder on the Main Menu and press the READ/OK key.
The Recorder screen appears.
2. Select Review Data to delete a measurement or Recall Data to delete a
setup and press the READ/OK key.
Device Identity
Status
TIP If the connection fails, try it again, making sure you follow steps 3
and 4 in close sequence. You may need to unplug the USB cable
from your computer and replug it into the USB port. If the
connection still fails, use the ActiveSync Troubleshooter (Help >
Microsoft ActiveSync Help) to help you identify and correct
problems.