Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 237)

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 237
Balancing Application Chapter 8
1. Press F3 (Memory). The Memory - Internal screen appears.
2. Press F2 (Save), then do one of the following:
•
To save the data to an existing file, highlight the file, and press F2 (OK).
Press F2 (Yes) to overwrite the existing file. Note that you can return to
the Memory - Internal screen without overwriting the file by pressing
F3 (No).
• To save the data to a new file, highlight ‘new‘ and press F2 (OK). Enter
a file name using the key pad or accept the default file name (‘BALxxx‘
where the numbers are incremented by one until 999 is reached). When
the entry is complete, press F2 (OK).
3. When you are finished, press F4 (Esc).
Reloading a Balance
You can reload a previously stored balance when you first open the Balancing
program, or when you press F3 (Memory).
List of saved balances.