Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 193)

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 193
Installing Optional Extension Modules Chapter 6
6. Press F2 (Yes) to uninstall the extension module.
7. Press F4 (Esc) to exit the Extension Manager screen.
Manage Extension Modules The Enpac 2500 data collector lets you to hide installed extension modules from
the Main menu. You may need to hide an advanced extension module icon from
an inexperienced user, for example, RuCD and FRF. Also, you can use the
Extension Manager to also show previously hidden icons.
Follow these steps to hide or show an extension module icon on the Main Menu.
1. Press 0 (Shift) on the Setup Utility screen to display the Extension
Manager function.
The Extension Manager function should remain on the screen for
approximately three seconds after releasing 0 (Shift).
2. Press F1 (Extn Mgr). The Extension Manager screen appears.
The Extension Manager displays a list of installed extensions module.
IMPORTANT The extension module is uninstalled and the license on the card is
released so that the card can be used to install the extension module
on another Enpac 2500 data collector.
If the installation card is not inserted in the data collector and no card
is found or the card does not have the extension module license for the
unit, you are prompted to insert the correct installation card or
continue without freeing the license.
IMPORTANT Once an extension module is hidden, its icon is not represented on the Main
Menu or displayed in the Enpac 2500 data collector About screen.
The extension modules that are
hidden are shown in [square
brackets].