Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 30)

30 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 1 The Enpac 2500 Data Collector
The Main Menu includes these standard options.
• Data Collection - The Data Collection option allows you to collect both
route and unscheduled (off route) data. It also allows you to view any data
stored in Enpac 2500. The data can be viewed on the screen by using the
RS-232 interface.
Refer to Data Collection Screen on page 33 for more information.
• Setup Utility - The Setup option allows you to set up global options for
collecting data.
Refer to Setup Screen on page 30 for more information.
Setup Screen
The Setup screen allows you to set up global options for the Enpac 2500,
including date and time. The Enpac 2500 displays the Setup screen when you
first power on the instrument or after you reboot or hardware reset the Enpac
2500. You can also access this screen by selecting Setup Utility from the Main
Menu.
Follow these steps to edit an option.
1. Use the up or down arrow keys to select the parameter.
2. Press the right arrow key to open a list of choices.
This is an example of the timeout list of options.
3. Select the choice by pressing the arrow keys or type in a value using the
numeric key pad.
4. Press the left arrow key to make your selection.
5. Press 0 to display the additional options on the Setup dialog box.