Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 149)

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 149
Collecting and Reviewing Data Chapter 4
5. Once the Enpac 2500 data collector collects the measurement, press Enter
to accept the measurement.
The green status indicator illuminates when the measurement is complete.
The measurement is stored as an Offroute measurement at the current
point.
The Offroute screen reappears.
6. Press F4 (Esc) screen to return to the Data Collection screen.
Storing Unscheduled Data When you unload unscheduled measurements from the Enpac 2500 data
collector, The Emonitor software stores it in the database. There are two
methods for storing.
Follow these steps to use the Smart Unscheduled mode.
1. Select Tools > Load/Unload.
2. Click Unload Options.
3. Check the Unscheduled location smart mode checkbox.
This lets the Emonitor software to match up measurement definitions with the
correct location based on certain rules.
See Unloading Measurements using Smart Unscheduled Mode on page 115 .
Enable smart unscheduled by
checking this option.