Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 245)

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 245
Time Recorder Application Chapter 9
The .csv time waveform files may be reviewed in the field with the Enpac 2500
(Recorder - Review Data). The time waveform .wav audio files can be imported
into vibration analysis software for post processing.
You can save a time recorder setup and measurement anytime the Save function is
displayed on the screen.
1. Press F3 (Save). The appropriate Recorder - Save screen appears.
2. Do one of the following:
•
To save the data to an existing file, highlight the file, and press F4
(Save). Press F2 (Yes) to overwrite the existing file. Note that you can
return to the Save screen without overwriting the file by pressing F3
(No).
• To save the data to a new file, highlight ‘save reading as‘ and press F4
(Save). Enter a file name using the keypad or accept the default file
name (current date timestamp). When the entry is complete, press F4
(OK).
3. When you are finished, press F1 (Cancel).
IMPORTANT When data is saved to an external memory card, only the .wav file is saved
on the card. The .csv file is always saved to the internal disk (Mobile Device/
Internal Disk/Analyser/Recorder directory).
TIP The Recorder - Save Data screen will automatically appear when the Enpac
2500 has finished recording the measurement. See
page 244 .
Saves the setup
parameters along wit
the recorded data.
Saves only the setup
parameters.
IMPORTANT The setup parameters are saved along with the measurement when you
press F4 (Save) on the Recorder - Save Data screen.