Metrohm 711 Liquino - Manual (Page 130)

4.9 GLP mode - validation
711 Liquino, Instructions for use 124
>GLP opt i ons
f i l l r at e max mL/ mi n
Filling rate
0.001…166.66,
max
(only for 'liquid: other')
= highest possible filling rate (depends on type
of dosing unit.)
Reduce the filling rate for liquids with
higher densities or viscosities as oth-
erwise too rapid filling may cause an
underpressure in the cylinder.
>GLP opt i ons
wei ght f r om: bal ance
Type of weight entry
balance, keyboard
>GLP opt i ons
bal ance- i d
Name of balance
8 ASCII characters
(only for 'weight from: balance')
Text input with <ALPHA> key
par amet er s
>GLP r epor t s
Report definitions for the result output
Navigate with <ENTER>
>GLP r epor t s no. 1
r epor t : of f
Selection of one or more reports which will be
printed out when the dosing procedure is
completed.
off
result,
parameter,
curve,
detail,
ff
= no report
= list of relevant results.
= list of all parameters
= curve of absolute error
= detailed list of volumes and weights
= FORM FEED; triggers page feed at printer
(important for laser and inkjet printers for
ejecting pages)
>XDOS r epor t s no. 2
r epor t : of f
… up to seven reports are possible
Maximalwerte für
Dosier- und Füllraten
Zylindervol. max. Rate
2 mL
6.66 mL/min
5 mL 16.66 mL/min
10 mL 33.33 mL/min
20 mL 66.66 mL/min
50 mL 166.66 mL/min
Dies sind reine Kolbenhu-
braten, ohne
Berücksichtigung der
Maximalwerte für
Dosier- und Füllraten
Zylindervol. max. Rate
2 mL
6.66 mL/min
5 mL 16.66 mL/min
10 mL 33.33 mL/min
20 mL 66.66 mL/min
50 mL 166.66 mL/min
Dies sind reine Kolbenhu-
braten, ohne
Berücksichtigung der
Maximum values for
dosing and filling rates
Cylinder vol. Max. rate
2 mL
6.66 mL/min
5 mL 16.66 mL/min
10 mL 33.33 mL/min
20 mL 66.66 mL/min
50 mL 166.66 mL/min
These are pure piston
stroke rates, without taking
filling times into account.