Metrohm 711 Liquino - Manual (Page 134)

4.10 Storing and loading methods
711 Liquino, Instructions for use 128
4.10 Storing and loading methods
The parameters of the different instrument modes (XDOS, PIP, CONT,
SMPL, SEQ and GLP) can be optimized according to the requirements and
stored as methods. Methods can either be stored in the internal memory or
also on a memory card; this can be read in at any time. Storing methods on
a memory card is highly recommended, as methods in the internal memory
of the Liquino can be deleted relatively easily. Memory cards can be pro-
tected against overwriting or deletion.
4.10.1 Internal method memory
Methods which are stored in the internal memory remain in existence even
when the instrument is switched off and can be reloaded at any time.
11 KByte of memory space is available. As methods are stored in a space-
saving format (approx. 20…500 Byte) numerous methods can be stored in
the Liquino itself.
USER
METHOD
C
The functions for loading, storing and deleting methods are accessed by
pressing the <USER METHOD> key.
Main menu:
met hods
>r ecal l met hod
Open submenu with <ENTER>
met hods
>st or e met hod
Use <> or <> to move down or up from one menu point to the
next
met hods
>del et e met hod
Use <HOME> or <END> to jump to first or last menu point
Return to normal state with <QUIT>
Submenus:
met hods
>r ecal l met hod
Load method
>r ecal l met hod
met hod: * * * * * * * *
Select method name
with <SELECT> and <ENTER>
8 ASCII characters Text input with <ALPHA>
met hods
>st or e met hod
Store method
>st or e met hod
met hod: * * * * * * * *
Input of method name
Confirm with <ENTER>
8 ASCII characters