Metrohm 711 Liquino - Manual (Page 47)

3 Introduction
711 Liquino, Instructions for use 41
• Accept the entry with <ENTER>.
Di spl ay: >CONT par amet er s
meas. uni t : mol / L
• Use the <SELECT> key to choose ‘ppm’ and confirm the entry with
<ENTER>.
Di spl ay: >CONT par amet er s
t ar get vol ume 10. 0 mL
• The target volume corresponds to the volumetric flask volume up to the
mark. In this example enter ‘10’ and confirm this value with <ENTER>.
Di spl ay: >CONT par amet er s
cont ent st d. 1. 000 ppm
• Enter the standard solution content (in this example 1000 ppm). Press
<ENTER> to accept the entry.
Di spl ay: par amet er s
>CONT dosi ng uni t
• As the ‘>CONT parameters’ submenu contains no further menu items,
the next submenu automatically becomes available. Open it with
<ENTER>.
Di spl ay: >CONT dosi ng uni t
dr i ve uni t : DOS1
• The Dosino to be used can be chosen with <SELECT> (DOSx refers
to the connection number on the 711 Liquino). Press <ENTER> to ac-
cept the entry.
Di spl ay: >CONT dosi ng uni t
dos. uni t : def aul t
• In this menu item the 711 Liquino is informed about the tubing of the
Dosino. Press <SELECT> until the dosing unit defined in the above
preparation step appears. Confirm with <ENTER>.
Di spl ay: par amet er s
>CONT r at es
• All the necessary parameters have now been entered. The parameter
menu is exited with the <QUIT> key.