Metrohm 711 Liquino - Manual (Page 50)

3.2 Tutorial
711 Liquino, Instructions for use 44
J
>XDOS par amet er s
• <> is used to open the next submenu.
Di spl ay: par amet er s
>XDOS dosi ng uni t s
• Press <ENTER> to access the submenu ‘XDOS dosing units'.
Di spl ay: >XDOS dosi ng uni t s
set up: si ngl e
• Use the <SELECT> key to choose the entry ‘tandem’ and confirm it
with <ENTER>.
Di spl ay: >XDOS dosi ng uni t no. 1
dr i ve uni t : DOS1
• The first of the two Dosinos can now be entered with <SELECT>
(DOSx refers to the connection number on the 711 Liquino). Accept
with <ENTER>.
Di spl ay: >XDOS dosi ng uni t no. 1
dos. uni t : def aul t
• In this menu item the 711 Liquino is informed about the tubing of the
Dosino. Press <SELECT> until the dosing unit defined in the above
preparation step appears. Confirm with <ENTER>.
• Skip the next menu item with <ENTER>.
Di spl ay: >XDOS dosi ng uni t no. 2
dosi ng dr i ve: DOS2
• Now repeat the entry for the second Dosino. Select the same dosing
unit again.
After the entry has been made for the second Dosino the submenu
‘>XDOS dosing unit’ is terminated and the next submenu is displayed.
Di spl ay: par amet er s
>XDOS moni t or i ng
• No further entries are required for the task to be carried out. Exit the
parameter menu with <QUIT>.