Metrohm 711 Liquino - Manual (Page 96)

4.5 SEQ mode - complex processes
711 Liquino, Instructions for use 90
par amet er s
>SEQ pr esel ect i ons
Definition of requests at start of sequence
Navigate with <ENTER>
>SEQ pr esel ect i ons
r eq. i dent : of f
Automatic request for up to
3 identification texts
id1,
id1&2,
all,
off
= only ID1 is requested
= ID1 and ID2 are requested
= ID1, ID2 and ID3 are requested
= no request
>SEQ pr esel ect i ons
>>SEQ pr ompt s
Submenu for definition of the
request texts
>>SEQ pr ompt s
i d1 I d1
Display text for requesting the first ID
8 ASCII characters
>>SEQ pr ompt s
i d2 I d2
Display text for requesting the second ID
8 ASCII characters
>>SEQ pr ompt s
i d3 I d3
Display text for requesting the third ID
8 ASCII characters
Use the identification texts (ID1…3) for identifying your sample or your
test. The IDs will be printed out in the report of the dosing procedure so
that the individual reports are identified unambiguously.
par amet er s
>SEQ r epor t s
Report definitions for result output
Navigate with <ENTER>
>SEQ r epor t s no. 1
r epor t : of f
Selection of one or more reports to be printed
out when the process is completed.
off
parameter,
ff
= no report
= list of all SEQ parameters
= FORM FEED; triggers page feed at printer
(important for laser and inkjet printers, for
ejecting pages)
>SEQ r epor t s no. 2
r epor t : of f
… up to two reports are possible
…