Metrohm 711 Liquino - Manual (Page 71)

4. Detailed description
Liquino 711, Instructions for use 65
4.2 Editing
The instrument dialog system of the Liquino 711 is chiefly organized as a
menu system. For example, the <CONFIG> key forms the access to the
configuration menu of the basic settings and the <PARAM> key provides
access to the parameters of a run mode or a method. The menus are further
split up into submenus.
4.2.1 Navigating in menus
ENTER
YES
J J
HOME
F
END
K
• Use the <ENTER> key to view and process the individual lines in a menu.
Di spl ay: conf i gur at i on
>per i pher al uni t s
• Submenu titles are marked with a ' >' character. Use the <ENTER> key
to access a submenu.
• You can also navigate in menus with the cursor keys <> and <>.
No data will be altered and no submenus opened.
• In order to reach the first or last menu item in a menu or submenu as
quickly as possible use the <HOME> or <END> keys.
• The <QUIT> key is available to access the next higher level from a
submenu or to reach the basic condition from a main menu.
4.2.2 Data input
ENTER
YES
CLEAR
Q
QUIT
NO
• Numerical inputs can be entered easily with the number block of the key-
board. Confirm each input with the <ENTER> key.
• An incorrect entry can be corrected with the <CLEAR> key. This always
sets the so-called CLEAR value; a special value e.g. 'max' or 'infinite'.
Di spl ay: >XDOS par amet er
f eed r at e max mL/ mi n
• A data input can be aborted with <QUIT>. This restores the previous
value.
DOS NR
SELECT
P
• Most menu items allow parameters to be selected from a selection list. By
repeatedly pressing the <SELECT> key the individual entries in the list can
be selected. These entries must also be confirmed with <ENTER>.
Di spl ay: >auxi l i ar i es
di al og: engl i sh
• Menu items which offer a selection list are indicated by a colon; see
above.
ALPHA
• Some menu items require a text input. Switch the alphanumeric text editor
on. Press the <ALPHA> keys. Details about text input are given below.