16 check software reset, End of diagnosis – Metrohm 711 Liquino User Manual
Page 165
Advertising
6. Appendix
711 Liquino, Instructions for use
159
6.5.16
Check software reset
This diagnosis step allows a warm start (software-controlled instrument
switch-off followed by switch-on) to be carried out.
•
Prepare instrument for diagnosis (see Sect. 6.5.3).
•
If necessary press key <9> several times until
di agnosi s
>power on r eset
•
<ENTER>
After pressing the <ENTER> key the diagnosis menu is exited and a
power-on reset is carried out.
End of diagnosis
Advertising