Metrohm 711 Liquino - Manual (Page 29)

3 Introduction
711 Liquino, Instructions for use 23
di am. t ube2 2. 0 mm
• The inner diameter of the tubing at Dosino port 2 can be entered here
and confirmed with <ENTER>.
Di spl ay: >dosi ng uni t s 1
l engt h t ube3 0 mm
• As no tubing is connected to Dosino ports 3 and 4 the tubing lengths
must be set to 0 mm. Check this for port 3, press <ENTER> and
check the value for port 4 (the diameter is not requested if the length
has been set to 0 mm). Press <ENTER> again.
Di spl ay: >dosi ng uni t s 2
I D D2
QUIT
NO • The dosing unit has now been defined. Press <QUIT> 2x to exit the
configuration menu.