Metrohm 711 Liquino User Manual
Page 176
6.10 Accessories
711 Liquino, Instructions for use
170
PTFE capillary tubing with 2xM6 thread, protected against light and buckling
∅ 0.3 mm inside diameter, length 6.5 cm
6.1805.140
∅ 0.3 mm inside diameter, length 13 cm
6.1805.150
∅ 0.3 mm inside diameter, length 40 cm
6.1805.160
Coupling bush (to connect 2 tubings with M6 thread), ETFE
6.1808.000
Adaptor M6 outside/M8 inside thread, PCTFE
6.1808.040
PTFE buret tip with ball stopper and tubing, M6 thread
∅ 2mm, length 400 mm
6.1537.010
∅ 2mm, length 1000 mm
6.1537.020
PTFE buret tip with anti-diffusion tip (450 mm),
6.9915.046
Inlet/draw-off tip M8, ∅ 3/4 mm, length 151 mm, PTFE
6.1543.120
Inlet/draw-off tip M8, ∅ 3/4 mm, length 198 mm, PTFE
6.1543.170
with: sleeve ∅ 7/15 mm, length 55 mm, for SGJ14/15, PVDF 6.2727.020
Inlet tube ∅ 3/6 mm, L 178 mm, M6 outside thread, PTFE
6.1821.000
Inlet tube ∅ 3/6 mm, L 278 mm, M6 outside thread, PTFE
6.1821.020
Stopper SGJ14/15 and M10 for inlet tube ∅ 3/6 mm, with
6.1446.060
screw nipple M10 exterial/6 mm inside diameter
6.2730.030
with O-ring
E.301.0022
SGJ Stopper SGJ14/15 with 4 borings, PVDF
6.2709.020
SGJ Stopper SGJ29/32 for round flasks (4x M6 thread), ETFE
6.9914.033
Aspiration tubing ∅ 1.5/2.5 mm, length 250 mm, M6, FEP
6.1829.010
Aspiration tubing 500 mm (M6 thread), FEP
6.1829.020
Guide sleeve NS14/15, ∅ 6.5 mm inside diameter
6.2705.000
Sleeve SGJ14/15, PTFE
3.2713.000
Sleeve SGJ29/32, PTFE
3.2713.010
Sleeve SGJ19/17, PTFE
3.2713.020
Sleeve SGJ14/15, POM
6.2023.020
Sleeve SGJ29/32, POM
6.2023.030
Clip for mounting cables/tubings
6.2053.000
Spiral band for holding together cables/tubings ∅ app. 4 mm
6.1815.000
Spiral band for holding together cables/tubings ∅ app. 7 mm
6.1815.010
See Metrohm accessories catalogue also.