Metrohm 711 Liquino - Manual (Page 86)

4.4 XDOS mode - controlled dosing
711 Liquino, Instructions for use 80
>XDOS pr esel ect i ons
>>XDOS pr ompt s
Submenu for definition of the
request texts
>>XDOS pr ompt s
i d1 I d1
Display text for requesting the first ID
14 ASCII characters
>>XDOS pr ompt s
i d2 I d2
Display text for requesting the second ID
14 ASCII characters
>>XDOS pr ompt s
i d3 I d3
Display text for requesting the third ID
14 ASCII characters
>XDOS pr esel ect i ons
st ar t del ay 00: 00: 00
Delay time before dosing
HH:MM:SS
par amet er s
>XDOS r epor t s
Report definitions for result output
Navigate with <ENTER>
>XDOS r epor t s
t emp. aut o scal e: on
Automatic axis scaling for
temperature curves
on, off
>XDOS Repor t s
t emp. scal e l ow - 70 ° C
Lower limit value for temperature axis
-70…200
onl y f or aut o scal e ' of f '
>XDOS r epor t s
t emp. scal e hi gh 200 ° C
Upper limit value for temperature axis
-70…200
onl y f or aut o scal e ' of f '
>XDOS r epor t s no. 1
r epor t : of f
Selection of one or more reports to be printed
out when dosing is completed.
off
result,
parameter,
curve,
V-list,
T-list,
comb. list,
ff
= no report
= list of relevant results
= list of all method parameters
= dosing curve, if necessary combined with temperature
curve
= volume list, list of dosed volumes at events
= temperature list, list of measured temperatures
= combined volume and temperature list
= FORM FEED; triggers page feed at printer
(important for laser and inkjet printers for
ejecting pages)
>XDOS r epor t s no. 2
r epor t : of f
… up to eight reports are possible
…
Examples of various reports are shown on the following pages.