2 seq mode parameters – Metrohm 711 Liquino User Manual
Page 95
4. Detailed description
711 Liquino, Instructions for use
89
4.5.2
SEQ mode parameters
PARAM
B
All settings in the parameter menu form a method and can be stored as
such.
Main menu:
par amet er s
>SEQ sequence
Open submenu with <ENTER>
par amet er s
>SEQ pr esel ect i ons
Use <> or <> to move down or up from one menu point to the
next
par amet er s
>SEQ r epor t s
Use <HOME> or <END> to jump to first or last menu point
Return to basic condition with <QUIT>
Submenus:
par amet er s
>SEQ sequence
Process sequence
Navigate with <ENTER>
>SEQ sequence
aut o st ar t 1
Number of times sequence is to be repeated
(confirm with <ENTER>)
1…99999,
infinite
(can be set with the <CLEAR> key)
>SEQ sequence st ep 1
command: NO OPERATI ON
Define step 1
(Select command with <SELECT>)
METHOD, PAUSE, TIMER,
SCAN, CONTROL, ENDSEQ,
NO OPERATION
…
Parameters of the individual commands can be
defined after confirmation with <ENTER>.
>SEQ sequence st ep 75
command: NO OPERATI ON
Further steps, up to step 75
METHOD, PAUSE, TIMER,
SCAN, CONTROL, ENDSEQ,
NO OPERATION.
Parameters of the individual commands can be
defined after confirmation with <ENTER>.
Up to 75 commands can be programmed in the sequence. Each
command forms a small submenu. After confirming the parameters of
the individual commands a new step is automatically attached to the
sequence.
In the sequence (step 1… x) quick navigation is possible by using the
cursor keys <> and <>. The <HOME> and <END> keys allow
a jump to the start or finish of the sequence.
With the <INSERT> key a new step can be inserted before the select-
ed command.
<DELETE> deletes the selected command from the sequence. The
following steps move up automatically.