Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC User Manual
Pmcprotego d.01 ... d.24
Advertising
This manual is related to the following products:
PMCprimo DriveP.01/AA0/5/0/0/208-480VAC, PMCprimo DriveP.12/AA0/4/0/0/208-480VAC, PMCprimo DriveP.12/AA0/4/P/0/208-480VAC, PMCprimo DriveP.03/AA0/4/0/0/208-480VAC, PMCprimo DriveP.06/AA0/4/0/0/208-480VAC, PMCprimo DriveP.24/ABB/4/0/0/208-480VAC, PMCprimo DriveP.03/AB0/5/0/0/208-480VAC, PMCprimo DriveP.06/AB0/2/0/0/208-480VAC, PMCprimo DriveP.03/AB0/3/0/0/208-480VAC, PMCprimo DriveP.06/AB0/3/0/0/208-480VAC, PMCprimo DriveP.12/AB0/2/0/0/208-480VAC, PMCprimo DriveP.12/ABC/4/P/0/208-480VAC, PMCprimo DriveP.12/AB0/3/0/0/208-480VAC, PMCprimo DriveP.03/AB0/2/0/0/208-480VAC, PMCprimo DriveP.12/AAC/4/0/0/208-480VAC, PMCprimo DriveP.24/AA0/5/0/0/208-480VAC, PMCprimo DriveP.12/AA0/2/0/0/208-480VAC, PMCprotego D.01/000/0/0/2/208-480VAC, PMCprotego D.03/000/0/0/2/208-480VAC, PMCprotego D.06/000/0/0/2/208-480VAC, PMCprotego D.12/000/0/0/2/208-480VAC, PMCprotego D.24/000/0/0/2/208-480VAC, PMCprotego D.12/000/0/P/2/208-480VAC, PMCprotego D.24/000/0/P/2/208-480VAC, PMCprotego D.01/200/0/0/2/208-480VAC, PMCprotego D.01/100/0/0/2/208-480VAC, PMCprotego D.01/010/0/0/2/208-480VAC, PMCprotego D.06/010/0/0/2/208-480VAC, PMCprotego D.06/100/0/0/2/208-480VAC, PMCprotego D.06/200/0/0/2/208-480VAC, PMCprotego D.03/010/0/0/2/208-480VAC, PMCprotego D.03/200/0/0/2/208-480VAC, PMCprotego D.03/100/0/0/2/208-480VAC, PMCprotego D.12/010/0/0/2/208-480VAC, PMCprotego D.24/200/0/P/2/208-480VAC, PMCprotego D.12/200/0/0/2/208-480VAC, PMCprotego D.12/100/0/0/2/208-480VAC, PMCprotego D.12/010/0/P/2/208-480VAC, PMCprotego D.12/200/0/P/2/208-480VAC, PMCprotego D.24/100/0/P/2/208-480VAC, PMCprotego D.24/010/0/P/2/208-480VAC, PMCprotego D.12/100/0/P/2/208-480VAC, PMCprotego D.24/200/0/0/2/208-480VAC, PMCprotego D.24/100/0/0/2/208-480VAC, PMCprotego D.24/010/0/0/2/208-480VAC
Table of contents
Document Outline
- Operating Manual PMCprotego D.01 ... D.24
- Preface
- Contents
- Introduction
- Overview
- Safety
- Function Description
- Overview
- Power element
- Control element
- Expansion cards
- Switch on/switch off behaviour
- Implementation of stop categories
- Installation
- Wiring
- Connector description
- Block diagram
- Notes on wiring
- Wiring procedure
- EMC-compliant wiring
- Power element
- Control element
- 6.7.1 Supply voltage 24 VDC
- 6.7.2 Digital inputs
- 6.7.3 Digital outputs
- 6.7.4 Analogue inputs
- 6.7.5 Encoder systems
- 6.7.5.1 Resolver
- 6.7.5.2 SinCos encoder with HIPERFACE interface
- 6.7.5.3 SinCos encoder with EnDat 2.1 interface
- 6.7.5.4 SinCos encoder with EnDat 2.2 interface
- 6.7.5.5 SinCos encoder with BISS interface, analogue
- 6.7.5.6 SinCos encoder with BISS interface, digital
- 6.7.5.7 SinCos encoder with SSI interface
- 6.7.5.8 SinCos encoder without data track
- 6.7.5.9 Incremental encoder ROD (AquadB) 5 V, 350 kHz
- 6.7.5.10 Incremental encoder ROD (AquadB) 5 V, 1.5 MHz
- 6.7.5.11 Absolute encoder with SSI interface
- 6.7.5.12 Electronic gearing, Master-Slave mode
- 6.7.5.13 Encoder emulation
- 6.7.6 Communications interfaces
- Expansion cards
- Commissioning
- Technical Details
- Appendix
- Contact address