Download firmware from sd card to servo amplifier, 7commissioning – Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC User Manual
Page 182
7.3
Download firmware from SD card to servo amplifier
7
Commissioning
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-10
7.3
Download firmware from SD card to servo amplifier
7300
Download firmware from SD card to servo amplifier
7-
][Inbetrieb_SD_Firmware
New firmware can also be downloaded to the servo amplifier from an SD
card inserted within the servo amplifier, without a connection to a PC.
Prerequisite:
`
The SD card must contain the following files:
– default.bin or default.s19: Firmware for the servo amplifier
– default.par: Parameter file for the servo amplifier
Procedure:
1. Switch off the 24 V supply to the servo amplifier.
2. Insert the SD card into the read device in the servo amplifier.
3. Keep both operator keys
on the servo amplifier pres-
sed down.
4. Switch on the 24 V supply to the servo amplifier.
5. Release the keys when "-" appears on the display.
6. Press both operator keys
again and then release
them.
– The firmware update for the servo amplifier is started.
– The file default.bin or default.s19 is loaded.
– Display: Counts from 0 to 100, stops at 100 and then counts from
100 to 0.
– The servo amplifier is restarted. The parameter file default.par is
loaded.