Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 103)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-7
5.5 Installing the expansion cards
5 Installation
5.5.2 Expansion cards for slot 2
Expansion cards for slot 2 5- Montage_Erweiterung_2
The following expansion cards are available for slot 2:
` PosI/O, PosI/O-AO
7. Tighten up the screws
The procedure for incorporating the
expansion card into slot 2 is similar to
that described for slot 1.
Remove the bottom hatched area of
the front film (labelled 2).
Lever out the cover plate beneath the
film.
Insert the expansion card into the slot.
Fasten the front plate of the expan-
sion card using the screws provided.