Expansion cards, 1 expansion card pmcprotego s1, pmcprotego s2, 2 expansion card i/o-14/08 – Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC User Manual
Page 72: 4function description, 4 expansion cards
4.4
Expansion cards
4
Function Description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-40
4.4
Expansion cards
4400
Expansion cards
4-
4.4.1
Expansion card PMCprotego S1, PMCprotego S2
Expansion card PMCprotego S1, PMCprotego S2
4-
][Funktion_Erw_protego_S
The expansion cards PMCprotego S1 and PMCprotego S2 are available
as accessories.
Funkt_Uebersicht_allg
The safety card monitors safety functions in accordance with EN 61800-
5-2. It monitors safe motion sequences on drives, which are safely
brought to a stop and shut down in the event of an error.
The safety card is built into a servo amplifier PMCprotego D. This con-
verts the servo amplifier into a safe servo amplifier.
][Funktion_Erw_protego_S_INFO
4.4.2
Expansion card I/O-14/08
Expansion card I/O-14/08
4-
][Funktion_Erw_I_O_14_8_protego_D
The expansion card I/O-14/08 is available as an accessory.
Functions:
`
14 additional digital inputs and 8 digital outputs
`
The function of the inputs and outputs can be configured in the com-
missioning software.
`
The inputs initiate the motion tasks that are stored in the servo ampli-
fier.
`
The outputs signal the status of the integrated position controller to
the higher level control system.
`
The functions of the inputs and outputs correspond to the functions
that can be assigned to the digital inputs and outputs on connector
X3 of the servo amplifier.
`
The inputs and outputs are isolated from the servo amplifier through
optocouplers.
Fig. 4-12:
Front view of expansion card I/O-14/08
INFORMATION
Detailed information about the function range can be found in
the operating manuals for the PMCprotego S1 and
PMCprotego S2.