Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 104)

5.5 Installing the expansion cards
5 Installation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-8
5.5.3 Expansion cards for slot 3
Expansion cards for slot 3 5- Montage_Erweiterung_3
The following expansion cards are available for slot 3:
` PMCprotego S1, PMCprotego S2
` PosI/O, PosI/O-AO
The procedure for incorporating the
expansion card into slot 3 is similar to
that described for slot 1.
Remove the yellow marked area of the
front film (labelled 3).
Lever out the cover plate beneath the
film.
When installing a safety card
PMCprotego S1/S2: Using suitable
pliers, pull out the blank in the safety
card plug.
Insert the expansion card into the slot.
Fasten the front plate of the expan-
sion card using the screws provided.