Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 166)

6.8 Expansion cards
6 Wiring
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-62
Output of SSI signals
Connector pin assignment
Connector X5 Pin Designation Description
1 GND Earth
2 n. c. --
3 n. c. --
4 CLOCK Pulse signal
5 CLOCK\ Pulse signal inverted
6 DATA Channel B
7 DATA\. Channel B inverted
8 n. c. --
9 n. c. --
n. c. = not connected
Connection
Output circuit Output of SSI signals
Shield connection in the connector
Always connect GND to the earth on
the control system
Select RT in accordance with the ca-
ble impedance, typically 150
Ω
1
5
6
9
6
7
4
PMCprotego X5 PLC
5
CLOCK
CLOCK\
DATA
DATA\
GND
1
GND
CLOCK
CLOCK\
DATA
DATA\
RT
RT