Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 169)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-65
6.8 Expansion cards
6 Wiring
6.8.5 Expansion card for SERCOS interface
Expansion card for SERCOS interface 6- ][Verdr_SERCOS_protego_D
Only SERCOS components that comply with the SERCOS standard
IEC 61491 should be used for the fibre-optic (FO) connection.
Connector pin assignment
Connector X13/X14 Pin Designation Description
X13 Receive Receive data
X14 Transmit Send data
Connection
Interface SERCOS
Connect the FO cable to the F-SMA
plug-in connector on the transmitter
and receiver.
Hand-tighten the union nut in a
clockwise direction.
Structure of the ring-shaped SER-
COS bus system with fibre-optic ca-
ble (schematic diagram)
Receive data:
F-SMA connector on X13
Send data:
F-SMA connector on X14
Receive
Transmit
X14
X13
SERCOS
Controller
PMCprotego
SERCOS 1
Receive X13
Transmit X14
PMCprotego
SERCOS 2
PMCprotego
SERCOS 3
Receive X13
Transmit X14
Receive X13
Transmit X14
Receive
Transmit