Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 133)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-29
6.7 Control element
6 Wiring
6.7.5.2 SinCos encoder with HIPERFACE interface
SinCos encoder with HIPERFACE interface 6- ][Verdr_Leiterquerschnitte_Verweis
Under “Connection cables”, please note the requirements for the:
` Cable cross sections
` Insulation material
][Verdr_Geber_HIPERFACE_protego_D
With cable runs > 50 m, please speak to our Customer Support.
Connector pin assignment
Connector X1 Pin Designation Description
1 +SIN Sine +
2 0 V Supply voltage 0 V
3 +COS Cosine +
4 Us Supply voltage for encoder 7 - 12 VDC
5 Data+ (RS 485) Parameter channel RS 485
6 n. c. --
7
ϑ
Thermal switch
8 n. c. --
9 REFSIN Reference sine
10 n. c. --
11 REFCOS Reference cosine
12 n. c. --
13 Data- (RS 485) Parameter channel RS 485
14
ϑ
Thermal switch
15 n. c. --
n. c.: not connected
1
8
9
15