Introduction, Validity of documentation, 1 retaining the documentation – Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC User Manual
Page 9: 1introduction, 1 validity of documentation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
1-1
1.1
Validity of documentation
1
Introduction
1
1000
Introduction
Introduction
1-
1.1
Validity of documentation
1100
Validity of documentation
1-
BA_Einfuehrung_1
This documentation is valid for the PMCprotego D. It is valid until new
documentation is published.
BA_Einfuehrung_2
This operating manual explains the product's function and operation,
describes the installation and provides guidelines on how to connect the
PMCprotego D.
][Einfhrung_Dokumente_beachten
Please also refer to the following documents from the motion control
range:
`
The online help for the PDrive commissioning software describes how
to set the parameters for the servo amplifier.
`
The "PMCprimo CAN Networking" manual contains guidelines for
networking multiple PMCprimo control systems and additional CAN-
open devices.
All these manuals can be found on the supplied CD-ROM: "Motion Con-
trol Documentation".
You will need to be conversant with the information in these documents
in order to fully understand this manual.
][BA_Einfhrung_Produkte
This operating manual is valid for the following products:
`
PMCprotego D.01 from Version 1.1
`
PMCprotego D.03 from Version 1.1
`
PMCprotego D.06 from Version 1.1
`
PMCprotego D.12 from Version 1.1
`
PMCprotego D.12 P from Version 1.1
`
PMCprotego D.24 from Version 1.1
`
PMCprotego D.24 P from Version 1.1
1.1.1
Retaining the documentation
Retaining the documentation
1-
Einf Aufbewahren
This documentation is intended for instruction and should be retained
for future reference.