MacroSystem Bogart SE Ver.4 User manual - Manual (Page 20)

20 Chapter 4
your licence codes, click on Export . A file named “licenses .
txt” will be written to the USB key . This file now contains all the
product codes you have entered so far . You can also look at
this file or print it out .
If you have saved this file and you need to re-enter the codes
after reinstalling the system, you will now be able to use this
USB key . Insert the USB key in your system, click Import in
the menu and then select your key in the list . The file with the
license codes that was written on your USB key will then be
read into your system . These products will then be unlocked
on your system . This means that, if these products are already
on the hard disk, these will be activated automatically . Should
you load these products afterwards, you will not have to un-
lock them .
Operation
Use “Operation” to select basic settings for the operation of
the system . Use this menu to select the language that should
be displayed in menus and on buttons . This is also used to
set the desired keyboard layout . There are cases in which you
will want to use a different keyboard layout . It is, for example,
possible to use a French keyboard, but with German or Italian
as its language setting .
“Language”: This displays a list with several languages that
can be used to change the language of the system . Select the
desired language and the switch takes place immediately .
“Keyboard”: This displays a list in which the desired language
of the keyboard layout can be selected . This is also true for
an externally connected keyboard . The “As language” setting
automatically uses the same setup defined under “Language” .
You can of course also set it to a different keyboard as speci-
fied by the interface language .
Use the trackball sensitivity to set the speed of screen pointer
movements . There are three possible speeds . Select the speed
according to your personal preferences .
“Display bubble help”: This activates (checkmark in the box),
or deactivates (dash in the box) the Help Texts . Once acti-
vated, Help Texts appear for the many user interface elements
that are only represented by symbols . If you leave the screen
pointer unattended for about one second, resting upon the
function symbol, the text will appear . This option is not avail-
able for some separately purchased add-on products . If the
option has been deactivated, these texts will not be displayed .
The “time code display” is used to select one of two possible
time displays for play back . The formats 000 .00:00 (mmm .
ss .ff) or 00:00:00:00 (hh .mm .ss .ff) can be selected (ff = frame
or image number) .
The “Play-Timecode” determines if the time is displayed run-
ning from 0 to the end (Casablanca) or if the tape position (on
the DV/HDV tape) is shown . This tape position can of course
only be shown if the information was transferred correctly
when the footage was loaded into Bogart SE .
“3D-Display”: This setting is only available if you have activat-
ed the add-on product “3D Edit” . Its functionality is explained
in the information about this product .
On some systems, there is an option called “respond to IR
remote control” and “respond to IR keyboard” . These op-
tions can be activated (mark box) if you wish to power up (and
down) the unit using the optional remote . This is possible if
you own our remote control . The remote can also be used to
partially operate the entire system and the Media Manager .
Storyboard, Timeline
You can choose here if you want to use the Storyboard view or
the Timeline view in your projects .
Note: When you are using the Video screen mode (connected
over Scart), it is not possible to switch to the Timeline view,
and you will get a message advising you to choose a higher
resolution screen mode.
Use the Mode button to indicate whether you want your movie
to be displayed as a storyboard or in a timeline .