MacroSystem Bogart SE Ver.4 User manual - Manual (Page 92)

92 Appendix
Your first personalized play list . You can now use the list for
playback . The top part of the screen shows the information
panel with total length .
1.7 Creating a music CD
Enter the music archive and press the DVD button (export/burn
DVD) to start putting together content for your CD . The left list
will show your imported music . Make sure to adapt the view if
you can only see the album names by pressing left/right and
selecting the title display . Press the P+ and P- buttons on the
remote or use the select button on the trackball to mark an
item and then OK to add it to the list on the right (selected for
CD/DVD burning) . The title you have added will be displayed in
black in the list on the left, to show you that it has already been
used .
Repeat this for all other music tracks that you wish to burn
onto CD . You can add them in any order you like . The top part
of the screen will show you the expected space required on
the disc . This figure depends on the medium you are using .
If you want to change the medium to a CD, DVD, dual layer
DVD or even Blu-ray disc, use button 3 to change the medium
type . If it is not possible to select the destination medium . You
should set an MP3 quality in the options . It is also possible to
select USB as the storage medium . You can read more about
this in chapter 2 .3 .8 . Next to the time, you can see the export-
ing ‘Options’ . Especially when exporting audio, you may have
particular needs for the compression type . Your choice will be
shown here as a text .
Once you are happy with the medium type and titles chosen,
press the DVD button to begin exporting, i .e . burning the disc .
A progress bar will show you how long it will take .
1.8 Creating a slideshow from the photo archive
Enter the photo archive and press the ‘Record’ button to reach
the photo-import section . Next, choose the medium that you
wish to export the photos from: ‘4 . CD/DVD’, ‘5 . USB device’
or ‘6 . network’ . Having done that, it will take a few moments
for the list of photos that are stored on the medium will appear .
The top right corner shows a preview of the currently selected
photo .
Use the remote control buttons P+ and P- (or the left trackball
button) to navigate the left list and add the photos for the slide-
show to the list on the right using the OK button . Make sure
to add the photos in the right order for your slideshow . When
done, press button 7 to begin importing the photos shown in
the list on the right . As an alternative, you can press ‘8 . Import
all new files’ or ‘9 . Import all files’ . As soon as all photos have
been imported, the system will return to the photo archives
menu . The photos will be listed in the lower part of the screen .
Tip: If the slideshow is to play the photos in the right order,
make sure that the random image function is deactivated in the
Options panel. Remove the ticked box if necessary. You can
also use the Options to set up the pause time; for example, you
can set it to 7 seconds.
Lastly, press the Play button to watch the slideshow .
You can find more playback options and settings explained in