14 shutdown (off) – MacroSystem Bogart SE Ver.4 User manual User Manual

Page 78

Advertising
background image

78 Chapter 4

the piece of music . You can now hear the music at this point
of the video without being disturbed by the original sound .
The second track contains a commentary which begins in the
middle of the piece of music and does not end until some time
after the music has ended . You can then reduce the volume
of the music for the complete duration of the commentary by
clicking on Correction, selecting the music track, and reducing
the volume by means of the right-hand control . The origi-
nal sound, which was muted for the duration of the piece of
music, must now also be switched off for the remainder of the
commentary .

For this purpose, create a new piece of music: silence . Create
a generous length . Insert it after the piece of music, and trim
it using the Range button up to the point in the video at which
the commentary ends . If you cannot find the point in the video
easily from the material, calculate the correct position if neces-
sary .

The volume control for the track in which the audio sample
is activated is of course not selectable under Correction, as
changes affecting the volume must be made by means of the
Volume button .

(19) Click on one of these menu symbols to jump from this
menu directly to the Audio Record, Edit menu and to the main
menu .

4.14 Shutdown (OFF)

This button turns off the system . Clicking it does exactly the
same as pushing the manual switch on the front . The power-
down procedure saves all settings, so that after turning on the
machine later you can continue your project where you left off .

The project is saved and then the system is shut down . You
can then turn on the machine only by using the manual switch
on the front of the unit . We warn against shutting down the
machine by pulling the power plug or cutting power to the ma-
chine . You should always turn off your system with the “Off”
button or the front switch . Data loss may otherwise occur .

Advertising
This manual is related to the following products: